Ward - established water softeners, filters and reverse osmosis systems specialist, sales and service throughout the UK for restaurant, hotel and catering applications.

K Series

The Everpure K series of pre filter is an effective method of removing all suspended particulate matter larger than 10 micron and can be used alone or with sub-micron filtration to prolong the life of pre-coat filters.

They are manufactured into a poly-fibre block and available as either K10 or K20.

Encapsulated in clear bowl filter housings they can be easily inspected for efficient operation.

Specification

Description	Poly fibre
Application	Pre-filters
Filtration Rating	10 micron
Operating Temp.	Not exceed 38 deg C
Operating Pressure	Max 10bar

	K10	K20
Capacity	Visual Max 1 year	Visual Max 1 year
Dimension	Dia=140 H=320	Dia=140 H=570
Part No.	9795-21	9795-71
Flow Rate	30 lt/min	30 lt/min
Connections	3/8” or ¾ NPT F	¾ NPT F

Installation Tips:-

Choose an accessible location which is suitable to support the weight of a system.
Use approved pipe work and fittings Minimum 10mm bore. (seek advice on high flow systems)
Do not braze/solder fittings into mounting heads.
Never use saddle valve for connection.
Do not exceed service flow rate.
Flush cartridges to drain at full flow for 5 mins.
Install in accordance with water regulations.

Operational Tips:-

Change cartridges:-
- on a regular 6 month preventative basis.
- when a significant pressure drop occurs.
- at least annually.
Always flush cartridges to drain after changing.
Open relief valve on head before unscrewing filter bowl.
Clean bowl with warm water only NO SPECIAL CLEANERS.
Lubricate seal if dry.