4C UV

The Everpure 4C UV water filter is for providing quality water and with the added protection of ultra violet disinfection. Manufactured using the 4C pre-coat filter it provides 0.5 micron filter protection, eliminates chlorine and other off tastes, removes cysts and organisms and provides microbiologically safe, clear tasting drinking water

The unit is available in one size and is complete with transformer.

Capacities of all filters may vary according to the influent water quality, the flow rate, the line pressure and the continuity of flow.

Specification

Description

Pre-coat & Ultraviolet disinfection

Application

Micribiological safe drinking water at point of use

Filtration Rating

0.5 micron

Operating Temp.

Not exceed 38 deg C

Operating Pressure

Max 10bar

Flow Rate

1.9 lt/min

Capacity

11000 lt approx.

Connections

Inlet 3/8 NPT female
Outlet 3/8 push fit

Dimensions

H=480 W=250 D110

Electrical Supply

240V 50Hz

UV Exposure

16000 MWS/cm sq

UV Lamp Life

7500 hours (1 year)


Installation Tips:-

  • Choose an accessible location which is suitable to support the weight of a system.
  • Use approved pipe work and fittings Minimum 10mm bore. (seek advice on high flow systems)
  • Do not braze/solder fittings into mounting heads.
  • Never use saddle valve for connection.
  • Do not exceed service flow rate.
  • Flush cartridges to drain at full flow for 5 mins.
  • Install in accordance with water regulations.

Operational Tips:-

  • Change cartridges:-
    - on a regular 6 month preventative basis.
    - when a significant pressure drop occurs.
    - at least annually.
  • Always flush cartridges to drain after changing.